|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Raise and lower trolling auxiliary motors on power and sailboats with ease
- Built especially for new 4 stroke, heavier, high torque motors (rated up to 30 hp and 169 lbs)
- Accommodates long or short shaft motors
- Mounting plate dimensions 8-1/8" x 9"H (21 x 23 cm)
- Extra wide 11-1/2" (29cm) Black Poly Mounting Board for new, wider style motor locking clamps (including motor mount clamps of 25 hp. Johnson and Evinrude motors)
- Motor Safety Cable included for added protection
- "Positive" Trim Angle Adjustment. ideal for sailboats with reverse angle transoms! Extends propeller further abaft the transom.
- Adjusts to transoms with plus or minus angles from zero to 28° in 7° increments. positive or negative tirm adjustment feature enables motor driveshaft to be trimmed relative to the plane of the boat transom.
- "Negative" Trim Angle Adjustment. Brings the propeller closer to the transom. (The same angle adjustment bracket can be inverted for positive or negative use)
Easier to Operate and Lift- With 5 vertical running position lock bar to compensate for water surface and boat load conditions - Hard coated for added resistance to wear.
- Heavy-duty stainless steel torsion springs that help counter balance motor's weight
- 2 Positive Safety locks secure bracket in up position
- Easier to hold with comfortable, soft Hypalon grip handle - Designed to accept most style outboard motor locks
Garelick Quality- Black satin anodized aluminum body resists corrosion - Dubbed the "Black Beauty" Outboard Motor Bracket
- 2" Thick, Extra Wide Black Poly Mounting Board - Weatherable and maintenance free
- Aircraft Type Stainless Steel Hardware - For increased durability with nylon friction resistant washers
|
|
|
|
|
|
|
|
|
