|
|
|
|
|
|
|
|
|
|
|
| |
The latest version of the Macerator pump now has a fully sealed motor and a new more powerful chopper blade. The sealed motor consists of o-ring sealed end bells, sealed bearings and a hard durable powder coating to prevent corrosion occurring both internally and externally. A new four-bladed chopper has been added to further reduce the possibility of clogging. The pump still has the Run-Dry feature present in previous models.- Triple sealed motor to prevent both internal and external motor corrosion.
- New four-bladed chopper reduces clogging.
- Detects the absence of fluid then shuts off pump before impeller is damaged.
- Sensor provides adequate run-dry period to allow initial priming of the pump.
- Interrupting power supply to the macerator resets the Run-Dry Device.
- Flow rate to 12 gpm (45 lpm).
- Self-priming to 4ft (1,2 m) vertical lift.
- Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).
Fitting:- Inlet Port - 1/2" (38mm) Hose Barb plus 1-1/2" NPT.
- Inlet Port, RV Model - 3" (75mm) Hose.
- Discharge Port - 1" (25mm) Hose Barb.
- Size - 11-3/8" x 4-3/4" wide x 3-5/8" high (29cm x 12cm x 9cm).
Specs:- 12V DC
- 15 Amps
- Fuse/Brkr.: 20
- Code: PP C
- Flow: 13 GPM (49 LPM)
|
|
|
|
|
|
|
|
|
